Petkeen is reader-supported. When you buy through links on our site, we may earn an affiliate commision. Learn More

20 DIY Rabbit Hutch Plans You Can Build Today

Oliver Jones

Building a rabbit hutch instead of buying a ready-made one not only can save you money, but it can also give you exactly the design you want. Whether you’re looking for an outdoor rabbit hutch or an indoor one, countless DIY hutch plans can help you build one.

Unfortunately, it can be hard to find the right DIY rabbit hutch plan for your needs. We’ve done the work for you and found 20 free plans to help you learn how to build a rabbit hutch – the one your rabbit dreams about!

Read on for our list of free plans.

divider-rabbitpaw1

1. Two-Story Rabbit Hutch Plan, From Rogue Engineer

This two-story rabbit hutch plan from Rogue Engineer allows your bunny to enjoy the grass while having a separate, secure place to sleep and eat. Hardware cloth makes sure your rabbit stays safe from predators.

  • Skill Level: Advanced

Materials
  • Wood composite panel
  • 2-inch by 4-inch by 8-foot premium studs
  • 2-inch by 2-inch by 8-foot premium studs
  • 2.5-inch Blue-Kote pocket screws
  • 1.25-inch exterior wood screws
  • 2.5-inch exterior wood screws
  • wood glue
  • hardware cloth
Tools
  • Pocket hole jig
  • drill
  • miter saw
  • circular saw
  • table saw
  • jigsaw

2. Sectional Rabbit Hutch Plan, From Instructables

This sectional rabbit hutch plan from Instructables is a great solution if you have multiple bunnies. The whole thing can easily be taken apart and transported around your yard or into a covered shelter as needed.

  • Skill Level: Moderate

Materials
  • Pine 2-inch by 3-inch by 8-foot boards
  • 2-inch by 2-inch by 8-foot boards
  • 24-inch by 25-foot welded wire
  • 36-inch by 10-foot roll of ½ wire mesh cloth
  • 2.5-inch decking screws
  • .5-inch staples
  • 2.5-inch narrow
  • zinc-plated hinges
  • .5-inch zinc-plated barrel bolts
  • 4-foot by 8-foot sheets of .5-inch plywood
Tools
  • Circular saw
  • drill and ⅛-inch bit
  • impact driver
  • hammer
  • staple gun
  • tin snips
  • carpenter square

3. Kid-Friendly Rabbit Hutch Plan, From Instructables

This kid-friendly rabbit hutch plan from Instructables makes it easy for kids to open the doors to the hutch. No more heavy roofs falling back down on little fingers!

  • Skill Level: Beginner/Moderate

Materials
  • 4-foot by 8-foot 15/32-inch plywood
  • 8-foot sections of corrugated plastic roofing
  • 8-foot by 16-inch vinyl-coated wire mesh shelves
  • 2-inch by 4-inch by 8-foot boards
  • 1-inch by 2-inch by 8-foot boards
  • 1-inch by 4-inch by 8-foot boards
  • standard hinges
  • shutter hinges
  • door latches
  • knobs
  • screws for corrugated roofing
  • deck screws 
Tools
  • Power miter saw
  • circular saw
  • drill
  • carpenter square

4. Simple Rabbit Hutch Plan, From the How to Specialist

This rabbit hutch plan is a simple design from the How to Specialist that still gives your bunny plenty of room. It’s a two-story, so your rabbit can access grass on the bottom-story and have a safe place to sleep on top.

  • Skill Level: Beginner

Materials
  • 1-inch by 3-inch lumber
  • ¾-inch plywood sheets
  • 1-inch by 2-inch lumber
  • 1.25-inch screws
  • 1.25-inch pocket screws
  • wood glue
  • outdoor glue
Tools
  • Miter saw
  • jigsaw
  • drill machinery
  • drill bits

5. DIY Rabbit Hutch and Run, From The Rabbit House

This simple rabbit hutch and run from The Rabbit House gives your bunny plenty of room to run and enjoy the grass. It also gives your bunny a safe place to escape the sun and sleep.

  • Skill Level: Beginner

Materials
  • 1-inch by 2-inch by 7-foot lumber
  • 25mm screws
  • 3-foot mesh rolls
  • U-shaped staples
  • wood glue
  • 75mm brass hinges
  • hock and eye
Tools
  • Drill
  • jigsaw
  • drill machinery
  • screwdrivers
  • hammer
  • wire snips
  • drill bits

6. Rabbit House and Run, From My Outdoor Plans

This rabbit house and run from My Outdoor Plans has plenty of room for multiple bunnies to run around and enjoy the grass. It also has a cute house to keep them sheltered while they eat or sleep.

  • Skill Level: Beginner/Moderate

Materials
  • 2-inch by 2-inch by 4-foot lumber
  • 2-inch by 2-inch by 8-foot lumber
  • 2-inch by 4-inch by 4-foot lumber
  • ¾-inch plywood sheets
  • 1⅝-inch screws
  • 2½-inch screws
Tools
  • Drill
  • miter saw
  • drill machinery
  • screwdrivers
  • hammer
  • sander

7. Rabbit Hutch Made From Wood Pallets, From Mother Earth News — Our Budget Rabbit Cage Plan

This rabbit hutch from Mother Earth News is a great way to use materials that you may already have at home. It’s made from wooden pallets, so there’s no need to buy extra lumber.

  • Skill Level: Beginner

Materials
  • Four wooden pallets
  • 30-inch by 10-foot roll of rabbit wire in 14 or 16 gauge
  • 2½-inch wood screws
  • 2-inch wood screws
  • horseshoe nails
  • latch and hinges
Tools
  • Skill saw or radial saw
  • drill
  • drill machinery
  • hammer
  • crowbar

8. Slant Roof Rabbit Hutch, From Construct 101

This slant roof rabbit hutch from Construct 101 holds your bunny off the ground for easier access for you to clean the cage or add food and water. It also keeps your bunny safer from predators.

  • Skill Level: Beginner/Moderate

Materials
  • 2-inch by 4-inch by 8-foot lumber
  • 2-inch by 2-inch by 8-foot lumber
  • ⅝-inch exterior siding t1-11 in 4-foot by 8-foot
  • Wire mesh
  • 2½-inch deck screws
  • 1½-inch deck screws
  • Fence staples
  • Door latch
  • Hinges
Tools
  • Drill
  • Miter saw
  • Drill machinery
  • Screwdrivers
  • Hammer
  • Wire cutters

9. Three-in-One Rabbit Hutch Plan, From Simply Easy DIY

This three-in-one rabbit hutch from Simply Easy DIY makes it easy to raise multiple rabbits in one hutch. You can adjust the plans to increase or decrease the number of units as needed.

Skill Level: Moderate

Materials
  • 2-inch by 4-inch by 8-foot lumber
  • 2-inch by 2-inch by 8-foot lumber
  • 4-foot of hardware cloth, hinges
  • Latch
  • Handle
  • 36-inch by 33-inch corrugated sheet metal
  • Wood screws
Tools
  • Drill
  • Miter saw
  • Drill machinery
  • Screwdrivers
  • Hammer
  • Sander

10. Cold Weather Rabbit Hutch Plans, From My Casual Homestead

This hutch plan from My Casual Homestead allows you to keep your rabbits outside even when it’s really cold. They’ll stay warm and dry in this large hutch that’s big enough for multiple rabbits.

Skill Level: Moderate

Materials
  • 2-inch by 4-inch by 8-foot lumber
  • 2-inch by 2-inch by 8-foot lumber
  • ⅜-inch by 4-foot by 8-foot plywood sheets
  • 4-foot by 25-foot 14-gauge double-galvanized wire with ½-inch by 1-inch holes
  • ½ gallon of wood waterproofing stain
  • 2½-inch deck screws
  • 1-inch deck/exterior screws
  • ¾-inch staples
  • 24-inch by 24-inch foam board
  • Tin roofing in 4-foot sections
  • 1¼-inch galvanized roofing screws
Tools
  • Drill
  • Miter saw
  • Drill machinery
  • Screwdrivers
  • Hammer
  • Sander
  • Staple gun

11. Basic Outdoor Rabbit Hutch, From Garden Plans Free

This simple rabbit hutch plan from Garden Plans Free keeps your bunnies warm and dry outside. The elevated hutch keeps them safe from predators and gives you easier access to their cage.

Skill Level: Moderate

Materials
  • 1-inch by 6-inch by 8-foot lumber
  • 2-inch by 2-inch by 8-foot lumber
  • ⅜-inch by 2-foot by 4-foot plywood sheets
  • 14-sq. ft. of tar paper and asphalt shingles
  • Galvanized screws
  • Hinges
  • Latch
  • Chicken wire
Tools
  • Drill
  • Miter saw
  • Drill machinery
  • Screwdrivers
  • Hammer
  • Sander

12. The Indoor Hutch Transformation, From Instructables

This plan from Instructables shows you how to convert an old end table into a rabbit hutch for the ultimate eco-friendly DIY project. Converting an old piece of furniture also saves you money on lumber and materials.

Skill Level: Beginner

Materials
  • ½-inch mesh
  • Staples
  • Piano hinge
  • Wood screws
  • 1-inch by ½-inch wood piece
Tools
  • Drill
  • Drill machinery
  • Screwdrivers
  • Staple gun
  • Sander or sandpaper

13. Indoor Rabbit Hutch Plan IKEA Hack, From Shona Craven

This rabbit hutch plan is an IKEA hack from the blog of Shona Craven. She shows readers how to repurpose a piece of IKEA furniture and turn it into a custom indoor rabbit hutch.

Skill Level: Beginner

Materials
  • Two IKEA HOL storage tables
  • Castors
  • Wire mesh
  • Staples
  • Hardboard
  • Panel pins
  • Linoleum
  • No More Nails
  • Pine strips (14mm by 25mm)
  • Pine strips (14mm by 14mm)
  • Pine edging strips (14mm by 3mm)
  • L-shaped brackets
  • Thumb turns
  • Small basic hinges
  • Corner hinges
  • Closed screw-in hook
  • String
  • Plastic litter tray
  • Shower curtain hooks
Tools
  • Jigsaw
  • Hacksaw
  • Wire cutters
  • Hammer
  • Screwdrivers
  • Staple gun

14. Multi-level Rabbit Cage, From Bunny Blurbs

This plan from Bunny Blurbs shows you how to create a multi-level rabbit cage inexpensively. With few materials, you can build an indoor cage for your bunny that will keep it busy and content.

Skill Level: Beginner

Materials
  • Two packs of wire ClosetMaid cubes
  • Zip ties
  • Wood planks
  • Carpet
  • Bungee cords
Tools
  • Utility knife
  • Scissors

15. Flower Box Outdoor Rabbit Hutch Plan, From Ginger Snap Crafts

This outdoor rabbit hutch plan from Ginger Snap Crafts will look beautiful in your yard and provide a safe place for your bunny. It features an elevated hutch, decorative flower box, and a cottage-style roof.

Skill Level: Moderate

Materials
  • FeltBuster High Traction Synthetic Roofing Felt
  • Roofing shingles
  • Cap shingles
  • 1¼-inch galvanized steel roofing nails
  • 1-inch round plastic cap roofing nail
  • 10-foot Aluminum Drip Edge pieces
  • Treated 4×4 post
  • Treated 1×2 and 2×4 and 2×6 boards
  • Wood screws, two rolls galvanized cage wire
  • Staples
  • Hinges
  • Lock
Tools
  • Drill
  • Drill machinery
  • Wire cutters
  • Metal snippers
  • Hammer
  • Utility knife

16. Indoor Rabbit Hutch On Wheels, From BuildEazy

This indoor rabbit hutch plan from BuildEazy shows you how to build a hutch that you can move around your house easily. The hutch has wheels like a wheelbarrow, so your bunny can hang out with you wherever you go.

Skill Level: Moderate

Materials
  • ⅝-inch plywood sheets
  • 2-inch by 2-inch lumber
  • 2¾-inch lumber
  • 1-inch diameter dowel
  • 2½-inch by 3½-inch lumber
  • Hinges
  • 1-inch gap welded mesh
  • Wheels
  • 6-inch bolts
  • Screws
  • Door latches
Tools
  • Drill
  • Miter saw
  • Drill machinery
  • Screwdrivers
  • Hammer
  • Sander

17. Easy Indoor Rabbit Hutch, From Instructables

This is a simple indoor rabbit hutch plan from Instructables. It gives your bunny two levels to explore, and the finished result looks like a piece of furniture.

Skill Level: Beginner

Materials
  • ½-inch plywood
  • ⅜-inch plywood
  • ½-inch by 1½-inch wood piece
  • ½-inch by 2½-inch wood piece
  • 8-inch by 24-inch wooden ramp
  • Hardware cloth
  • Furniture feet
  • Door latches
  • Door hinges
  • Screws
  • Staples
  • Wood glue
  • Wood finish
Tools
  • Drill
  • Miter saw
  • Drill machinery
  • Staple gun
  • Clamps

18. Three-Level Indoor Bunny Hutch, From Brey Family

This three-level indoor bunny hutch plan from Brey Family shows you how to make your own wire rabbit condo. It gives your bunny plenty of room to explore, with different sections that can be used for sleep, eating, and playing.

Skill Level: Beginner

Materials
  • Two packs of wire storage cubes
  • Sheet of plywood
  • Zip ties
  • Wooden dowels
  • Spring clamps
Tools
  • Utility knife
  • Scissors

19. Multi-story Indoor Rabbit Hutch, From The Rabbit House

This multi-story indoor rabbit hutch plan from The Rabbit House shows you how to make your own bunny condo out of simple materials. This is an inexpensive DIY project that gives your bunny plenty of things to do in different sections of a large cage.

Skill Level: Beginner

Materials
  • Two packs of wire storage cubes
  • Sheet of plywood
  • Zip ties
  • Wooden dowels
  • Spring clamps
Tools
  • Utility knife
  • Scissors

20. Indoor PVC and Wire Rabbit Hutch, From Raising Rabbits

This indoor PVC frame plan from Raising Rabbits shows you how to make a frame for a wire rabbit cage using inexpensive materials. This elevates the cage off the floor and makes it easier to access your bunny.

Skill Level: Beginner

Materials
  • 1¼-inch by 7-foot PVC
  • 1-inch by 26-foot PVC
  • PVC caps, PVC L’s
  • PVC T’s, glue
  • 1-inch by 2-inch by 3-foot wire
  • ½-inch by 1-inch by 3-foot wire
  • J clips
  • Door latch
Tools
  • Utility knife
  • Scissors
  • Wire cutters

We hope that our list of free plans has helped you find the best DIY rabbit hutch plan for your bunny or bunnies! It’s a great way to save money and learn how to build a rabbit hutch customized to your rabbit’s needs!

Happy building!

submit a pet pk rabbit

Contents

Oliver Jones

Oliver (Ollie) Jones - A zoologist and freelance writer living in South Australia with his partner Alex, their dog Pepper, and their cat Steve (who declined to be pictured). Ollie, originally from the USA, holds his master's degree in wildlife biology and moved to Australia to pursue his career and passion but has found a new love for working online and writing about animals of all types.